Home  |  Company Information  |  Company Policies  |  Contact Us
Custom Fabrication
Machined Parts
Standard/Stock Materials
Engineered Plastics
Conveyor Components
What's New
Steals & Deals

Tel: 704-739-7463
Fax: 704-739-5566

Technical Product Data Sheets

PVDF(polyvinylidene fluoride)

Polyvinylidene fluoride, or PVDF, is a fluorinated thermoplastic which has outstanding resistance to most mineral and organic acids, aliphatic and aromatic hydrocarbons, alcohols, halogenated solvents, and oxidizing environments.  It also has outstanding aging resistance, with its properties remaining constant after many years of continuous use.

Typical Values
Physical Properties ASTM Test Method Units PVDF
Density D792 lbs/in3 0.064
Water absorption:
24 hrs, 73 F
D570 % <0.4
Mechanical Properties ASTM Test Method Units PVDF
Tensile Strength, Ultimate, 73F D638 psi 30,2006,650
Tensile Modulus, 1% Secant, 73F D638 psi 348,000
Elongation, ultimate, 
73 F
D638 % 80
Flexural Strength, 73 F D790 psi 10,750
Flexural Modulus, Tangent, 73F D790 psi 391,500
Compressive Strength, 73F D695 psi 11,600
Izod Impact Strength, Notched, 73F D256 ft-lbs/in. 1.9
Rockwell Hardness D785 ---- R100
Coefficient of friction @ 68F, 1200 in/min, 155 lbs. Load ---- Static/Dynamic 0.3
Thermal Properties ASTM Test Method Units PVDF
Heat Deflection @ 264 psi,  D648 F 235
Coefficient of Linear Thermal Expansion D696 in./in./-F 7.1 X 10-5
Melting Point D3448 F 352
Thermal Conductivity C177 BTU-in/hr-ft2/F 1.31
Flammability UL94 ---- V-0
Electrical Properties ASTM Test Method Units PVDF
Volume Resistivity,  73F D257 ohm-cm 5 X1014
Dielectric Constant @ 60 Hz, 73F D150 ---- 9
 Material Availability:


Plastic Products, Inc. 

This information is only to assist and advise you on current technical knowledge and is given without obligation or liability.  All trade and patent rights should be observed.  All rights reserved.


Plastic Products is your complete source for any plastics material.
E-mail, call or fax your requirements today.