Nylon 6/6

Nylon 6/6 GF-30 (30% glass-fiber reinforced)

All NYLON 6/6 materials have high mechanical strength and superior resistance to wear and organic chemicals. NYLON 6/6 GF30 has more than double the strength and stiffness of unreinforced nylons and a heat deflection temperature which approaches its melting point. NYLON 6/6 is a 30% glass-fiber-reinforced nylon 6/6 material whose important properties include high tensile and flexural strength, stiffness, excellent heat deflection temperature, and superior abrasion and wear resistance.

Typical Values

Physical Properties	ASTM Test Method	Units	Nylon 6/6	Nylon 6/6 GF30
Density	D792	lbs/cu in	0.0412	0.0488
Specific Gravity	D792	—-	1.14	1.35
Water absorption, 24 hours, 73°F (23°C)	D570	%	8.5	0.7

Mechanical Properties	ASTM Test Method	Units	Nylon 6/6	Nylon 6/6 GF30
Tensile Strength 73°F	D638	psi	12,400	27,000
Elongation 73°F	D638	%	90	3
Flexural Strength, 73° F	D790	psi	17,000	39,100
Flexural Modulus, 73°F	D790	psi	4.1 X 105	12 X 105
Izod Impact Strength, Notched, 73°F	D256	—-	R120 – M79	M101
Rockwell Hardness	D785	ft-lbs/in.	1.2	2.1

Thermal Properties	ASTM Test Method	Units	Nylon 6/6	Nylon 6/6 GF30
Heat Deflection  66 psi 264 psi	D648 D648	degrees F degrees F	455 194	490 482
Max.Temperature Long Term Short Term	—-	degrees F degrees F	170 355	230 465
Coefficient of Linear Thermal Expansion	see below
-20 to -200°F 200 to 460°F	D696 D696	in./in./degrees F —-	4.5 X 10-5 5.0 X 10-5	1.2 X 105 —-

Electrical Properties	ASTM Test Method	Units	Nylon 6/6	Nylon 6/6 GF30
Volume Resistivity,  73°F	D257	ohm-cm	1015	1015
Dielectric Constant, 60 Hz, 73°F, 50% RH	D150	—-	4.0	—-
Dielectric Strength	D149	V/mil	600	530

Plastic Products, Inc.

This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved.

Plastic Products is your complete source for any plastics material.
E-mail, call or fax your requirements today.