Plastic Products offers an extensive line of plastic materials and has complete facilities for plastic molding, machining & fabrication. In short, we can be your complete source for nearly anything plastic and can further assist you with our manufacturing expertise. Please allow us the opportunity to quote your requests.
PET is an unreinforced, semi-crystalline thermo-plastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro-mechanical parts. Because PET has no centerline porosity, the possibility of fluid absorption and leakage is virtually eliminated.
Typical Property Values
| Density | |||
| Water absorption, 24 hours |
| Specific Gravity | |||
| Tensile Strength at break, 73° F | |||
| Tensile Modulus, 73°F | |||
| Elongation at break, 73°F | |||
| Flexural Strength, 73°F |
|||
| Flexural Modulus, 73°F | |||
| Izod Impact Strength, Notched, 73°F | |||
| Rockwell Hardness | |||
| Coefficient of Friction @ 40psi, 50 fpm |
| Heat Deflection, 264 psi | |||
| Melting Point | |||
| Coefficient of Linear Thermal Expansion | |||
| Applicable Temp. Range for Thermal Expansion | |||
| Max. Serving Temperature for Long Term | |||
| Flammability |
| Volume Resistivity, 73°F | |||
| Dielectric Constant @ 60 Hz, (73°F, 50% RH) | |||
| Dissipation Factor, @ 60 Hz, 73°F | |||
| Dielectric Strength |
Material Availability:
Rods: Diameters 1/4″ to 6 ” – Length: 10 feet
Plates: 1/4″ to 2″ thickness inclusive are 24 X 48 inches
2 1/4 ” to 4″ thickness inclusive are 12 X 48 inches
Profiles, tubes and special sizes are custom-produced on request
This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved.
Plastic Products is your complete source for any plastics material.
E-mail, call or fax your requirements today.
